Low Spatter Solid Welding Wire Er70s-6 for Structural Steel

• Type: Solid Cored Wire
• Material: Carbon Steel
• Flux Containing: Not Containing Flux
• Model NO.: welding wire
• Slag Characteristic: Acidic
• Extended Length: 10-20mm
• Transport Package: Customized
• Specification: 0.8; 1.0; 1.2; 1.6
• Trademark: SURADA
• Origin: Jiangsu, China
• HS Code: 7505220000

Product Description

Product Description

Provide stainless steel flux-cored wire, heat-resistant steel flux-cored wire carbon steel and low alloy steel flux-cored wire, self-protection flux-cored wire, submerged arc welding wire, as well as wear-resistant cladding flux-cored wire suitable for use in different industries and other series of models of welding materials.

Specification

Grades	FRN-ER50-6
Package	According to Customer Requirements
Flux Containing	Not Containing Flux

Carbon Steel Gas Shielded Solid WireFeatures: 

FRN-ER50-6 gas-shielded solid wire can adapt to larger current welding, good all-position welding process performance, high deposition efficiency, low sensitivity to porosity of the weld metal, arc stability, small spatter, beautiful molding. Applicable to automobiles, bridges, construction, shipbuilding, machinery, pressure vessels, boilers and other structures and 500MPa carbon steel or low alloy steel welding. Protective gas and current type: C02 or mixed gas DC (+) can be used.

FAQ

Q1. How to choose the right wire?

A.
-Match the base material: the composition of the wire needs to be the same as the base material (e.g. ER70S-6 for carbon steel, 308L for stainless steel).
-Welding process: Solid wire for MIG/MAG welding; flux-compatible wire for submerged arc welding;
-Flux-cored wires (e.g. E71T-1) are suitable for high deposition rate scenarios.

Q2. What should I do if the wire feeding is not smooth when welding?
A: 
 Possible causes and solutions:
-Wire feeding wheel is worn: replace or adjust the compression.
-Conductive nozzle clogging: Clean or replace the conductive nozzle (hole diameter needs to match the wire).
-Wire feed pipe is bent/dirty: straighten the pipe or clean the internal oil, burrs.
-Wire disk jamming: Make sure the wire disk rotates flexibly and is not tangled.