E71t-GS Fcaw Wire for Light Fabrication Without Shielding Gas

• Type: Flux-cored Wire
• Material: Carbon Steel
• Flux Containing: Not Containing Flux
• Model NO.: welding wire
• Slag Characteristic: Acidic
• Extended Length: 10-20mm
• Transport Package: Customized
• Specification: 0.8; 1.0; 1.2; 1.6
• Trademark: SURADA
• Origin: Jiangsu, China
• HS Code: 7505220000

Product Description

Product Description

Provide stainless steel flux-cored wire, heat-resistant steel flux-cored wire carbon steel and low alloy steel flux-cored wire, self-protection flux-cored wire, submerged arc welding wire, as well as wear-resistant cladding flux-cored wire suitable for use in different industries and other series of models of welding materials.

Specification

Grades	E71T-GS
Package	According to Customer Requirements
Characteristics and Uses	Highly efficient self-protecting flux-cored wire. Good molding, less spatter.
Flux Containing	Not Containing Flux

Self-shielded flux-cored wire

1, the arc penetration, the melt droplet is jet transition, spatter small, good operation process performance. At the same time, the welding torch structure is simple, light weight, easy to operate.

2, anti-wind anti-porosity performance is good, in the welding by the wire's own metallurgical reaction to form a protective atmosphere, can be four wind welding, as long as the wind speed does not exceed 8M / S, can not take any protective measures, especially for field construction operations.

3, the molten metal can be in the low temperature and wind and other harsh conditions under the same low-temperature toughness.

FAQ

Q1. How to choose the right wire?

A.
-Match the base material: the composition of the wire needs to be the same as the base material (e.g. ER70S-6 for carbon steel, 308L for stainless steel).
-Welding process: Solid wire for MIG/MAG welding; flux-compatible wire for submerged arc welding;
-Flux-cored wires (e.g. E71T-1) are suitable for high deposition rate scenarios.

Q2. What should I do if the wire feeding is not smooth when welding?
A: 
 Possible causes and solutions:
-Wire feeding wheel is worn: replace or adjust the compression.
-Conductive nozzle clogging: Clean or replace the conductive nozzle (hole diameter needs to match the wire).
-Wire feed pipe is bent/dirty: straighten the pipe or clean the internal oil, burrs.
-Wire disk jamming: Make sure the wire disk rotates flexibly and is not tangled.